1.A connecting hyperlink of an O-ring Chain for standard application is pre-coated with grease in the pins. Prior to connection, confirm the grease about the surfaces of pins, and if your volume of grease is smaller, apply grease with bare hands. (If gloves are made use of, the grease is going to be absorbed from the gloves.)
Instance: When the connecting hyperlink (I) of an O-ring chain for common application is
shipped, O-rings are fitted on the roots with the pins. If your O-rings come loose resulting from vibration during transport, refit the O-rings in for the roots from the pins.
In this instance, be sure you return the grease collected on the roots of the pins on the central surfaces with the pins, extra at portion A than at portions B shown while in the over illustration. (Portions A is worn on account of sliding using the bushings.)
two.The chain may be most effortlessly linked within the teeth of the sprocket. Engage the backlinks at each ends of the chain with all the sprocket teeth and match connecting pins. If your sprocket can be moved, the chain may also be connected over the loosened side.
3. Connecting procedure
1.Confirm that O-rings are connected to your roots in the pins.
2.When the volume of grease utilized around the connecting pins is little, coat the pins with grease with the central portions.
3.Insert the connecting pins in to the bushings on the inner hyperlinks at the two ends.
4.Confirm that the grease is applied on the total encounter in the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins into the connecting plate and while pressing the connecting plate, install the spring clip. Verify regardless of whether the head (the finish with no split) from the spring clip is turned during the feeding direction in the chain. (See the next illustration.)
6.Make sure to confirm the spring clip is securely fitted within the clip grooves on the connecting pins.
This completes jointing on the connecting link. Note that grease within the surfaces of connecting pins and O-rings might be removed for the duration of installation operate. In this instance, re-grease making use of the grease over the surface of the base chain or the grease inside the polyethylene bag in which the connecting hyperlink was contained.