Material Dealing with Energy UNIT one
This power unit is created for your fork lift sector, consisting of highly productive gear pump, DC motor, guide increase and lower valve, tank, ect. The up and down movement are managed through the lever on the manual release valve, which is equipped with an electric switch to activate the motor. The lowing speed is managed by the pressure compensated movement control valve.
1. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean each of the hydraulic components concerned ahead of set up of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of impurities, N46 hydraulic oil is advised .
four. Oil altering is required just after the original one hundred operation hrs, afterwards the moment each and every 3000 hrs.
5. The electrical power unit shown is created to be mounted horizontally.
Materials Managing Power UNIT two
This energy unit attributes electrical power up gravity down circuit. Activate the begin solenoid to start the motor to lift the machine. The lowing motion is activated from the solenoid valve together with the reducing pace controlled from the strain compensated movement control valve. Solutions of this series could be broadly used in the industry of logistic devices like fork lift, mini lift table, and so on.
1. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean every one of the hydraulic parts concerned prior to mounting the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which need to also be clean and totally free of impurities, N46 hydraulic oil is proposed .
4. Oil changing is required after the first a hundred operation hrs,afterwards when every single 3000 hrs.
5. The power unit should be mounted horizontally.