Downsizing Your Process with Higher Energy Chains
HK form roller chains conform to H form of ANSI, and their thickness of inner and outer hyperlink plates are equal to these with the following larger dimension chain. Hence, HK type roller chains are higher in tensile strength by about 20%and in highest allowable load by about 15% than individuals of standard roller chains. Since the weight with the chains can also be more substantial, HK kind roller chains are ideal for that application of heavy duty at minimal speed.
Proposed employs
?Optimum for 
spots wherever larger strength is needed but large and heavier chains are not able to be employed.
Collection of chains
Decide on a right HK variety roller chain based on “Low-speed selection”
To the optimum allowable load, see the next table of dimensions.
HK style roller chains can be found up to triplex.
Sprockets
Use conventional sprockets for any simplex HK roller chain Because the transverse pitches are larger than people of conventional chains while in the case of duplex or triplex, conventional sprockets can’t be utilised. Refer to your sprocket tooth profiles for HK
Connecting hyperlink and offset website link
The tensile power of connecting backlinks and offset links are listed over the left, however the highest allowable load is lower than that of your base chain. Please seek advice from us should really you’ve any queries. It really is advisable to work with the connecting website link of interference-fitted (FJ, HJ)
In no way make the holes in the connecting plate greater and under no circumstances make the pins thinner to facilitate the operate for fitting the pins into the connecting plate, considering that otherwise the fatigue power will probably be lowered.
Collection of chains
Pick a correct HK style roller chain based on “Low-speed selection”
For the maximum allowable load, see the following table of dimensions.
HK style roller chains can be found as much as triplex.
Sprockets
Use normal sprockets for any simplex HK roller chain Because the transverse pitches are larger than those of standard chains during the case of duplex or triplex, typical sprockets are not able to be utilized. Refer to your sprocket tooth profiles for HK
Connecting website link and offset hyperlink
The tensile power of connecting links and offset hyperlinks are listed within the left, however the maximum allowable load is decrease than that on the base chain. Please consult us need to you might have any questions. It can be recommended to implement the connecting website link of interference-fitted (FJ, HJ)
In no way make the holes of your connecting plate larger and never make the pins thinner to facilitate the perform for fitting the pins into the connecting plate, due to the fact otherwise the fatigue strength is going to be lowered.
