Due to their design and from being combined with a helical equipment stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. Also, they are extremely low-noise and therefore avoid high sound emission levels.
Low-noise continuous operation: equipment unit combination optimized regarding efficiency
Do you expect a drive remedy to impress you using its high level of functionality and efficiency? If so, we’d recommend our high-quality helical-worm gearmotors EP to you. These could be implemented individually in the modular system. In this manner, they offer you a massive range of sizes, equipment ratios and motor sizes.
However, their greatest strength is usually their running smoothness and their extremely low noise development. One thing is certain – With the helical-worm gearmotors EP you opting for a powerful drive solution that you will hardly also hear.
The overall concept offers you many more practical product characteristics and benefits. These include the significantly higher effectiveness of the helical-worm combinations as opposed to single helical-worm gear products. This is one way you save extra energy in the procedure of your systems and are able to noticeably reduce ongoing working costs.
You will receive the low-noise helical-worm gearmotors EP. – to suit your person requirements – with a wide selection of AC motors. In addition, you can freely configure all of the relevant properties. In this way, you can effectively utilize all the benefits offered by this mixture of low-noise helical-worm equipment unit and performance-optimized motor. Even greater variance may be accomplished thanks to the optional flange or foot-mounted design and by choosing between solid and hollow shaft.
Save money and time
By opting for one of our gearmotors, you are already saving time and money with this selection and task planning. It is because our modular system allows a multitude of combination options for gear systems and motors. You can as a result reduce operating costs, depend on an extended service life and benefit from simplified maintenance that is feature of our brand.
Helical-worm gear units
Helical-worm combinations with considerably better efficiency than one helical-worm gear units
Very low-noise operation
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm gear units of series EP
Combine the helical-worm gear unit with this AC motors:
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm steering wheel provide exceptional strength and long service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminium alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft attach or flange mounted configurations
Right Angled gear units
High permitted overhung loads
Helical-worm Gearmotor S Series
Ever-Power helical-worm gear products are helical/helical-worm combinations, so they are more efficient than normal helical-worm gear units. Due to their outstanding performance, these drives can be used in every industrial sector and customized to person torque and acceleration requirements. The reduction ratios afforded by the helical-worm equipment stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for basic applications.
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique mixture of optimized worm wheel materials with unique lubricants, optimized form, this powerful electric motor achieves high degrees of effectiveness and torque. The casing machined on all sides enables diverse mounting options. Double chamber shaft seals are utilized as standard.
The reduced contour design makes it ideal for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – a particularly essential feature for areas with stringent hygiene requirements.
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and surface worm gears: Provides higher efficiencies and higher torque capacity in smaller sized sizes.
Multiple Input Options: Essential gear motors, ” or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft installation, inch and metric output shafts, mounting pilots and flanges provide a wide selection of design solutions.
UNIBLOCK Housing: For optimum rigidity universal mounting on five sides or with a torque arm.
Sealed for Washdown: Retains contaminants and water out.
Worldwide Motor: Multiple leads and windings for globally multi volt/Hz requirements in addition modular design to accept brakes, encoders or forced cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct position worm geared motors established new specifications for reliability, performance and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design offers easy integration today and a really future proof option. The EP gear electric motor offers total versatility in mounting options includes shaft, base, encounter, and flange solutions. The motor terminal box can be mounted in substitute positions rotated in 90º steps around the engine frame offering for unparalleled integration opportunities.
EP gear motors adhere to UNITED STATES and International standards, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a genuine total remedy for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is dust tight and hose evidence,and can be used outside or in wet and dusty environments without the use of additional enclosures. Complete rated output is offered by the result shaft of the machine.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Due to the unique combination of optimized worm wheel material with particular lubricants and optimized form, this powerful geared motor achieves high levels of efficiency and torque. The low contour design helps it be ideal for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a broad selection of compact, durable helical gear drives with extended life performance features and simplified maintenance. The usage of state of the artwork helical and worm equipment combinations affords optimum functionality fulfilling a multitude of ratio requirements. The 800 BR is functionally interchangeable with many major manufacturer’s drives.
Double and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All systems shipped pre-lubed for your particular mounting position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and immediate input
Projecting and hollow output shafts
Output flange kits
Torque arm kits
Output shaft kits
Available in nontoxic white (BK) and stainless epoxy finish (SBK)
Obtainable in hollow or projecting output shafts
Double and triple reduction ratios
Flanged or foot mounted
All units adaptable to floor, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared engine. A favorably priced alternative for the standard jobs anticipated of a right-angle drive.
5 gear sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors offered with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC motor are directly flange mounted, the pinion is on the motor shaft. This integrated small design is an essential factor for the high precision and the extraordinary stiffness of EP geared motors.
For vector-controlled inverter procedure utilization of an incremental encoder is provided for as regular.
Worm helical worm gear motor gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power powerful worm gearboxes and helical worm gearboxes is more than 90%. All worm shafts are manufactured from case hardened alloy metal and the flanks are precision surface. The worm tires are made from particular wear-resistant bronze. Helical worm gears are equipped with a helical equipment. Worm gears with shrink disc, torque limiter, as well as adjustable backlash designs are also component of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Efficiency gearboxes in universal design. The housings are made from high quality cast iron. The rugget walls and inner ribbing ensure extremely torsional stiff and sound dampening housings. The external ripping offers a rapid heat conducting.
Type S und SS
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with rugged walls and internal ribbing
Extreme torsional resistance and low noise
Case hardened worm shafts and worms with precision floor flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Basic mounting, flange installation or universal design
Output shaft available since solid shaft or hollow shaft
Shrink disc, torque limiter,along with adjustable backlash
Second shaft end for fitting encoders or brakes
Free input shaft
ATEX specification according to directive 94/9/EG