Electrical power UNITS FOR DOUBLE-SCISSORS LIFT

Common Description
Equipped with the zero leak bidirectional checking sole-noid valves, this energy unit is intended for the operation of two independent circuits. Which are respectively for your primary and subordinate platforms in the double scissors lift. Two cut-off valves are applied for decreasing the machine manually in case of power reduction. If much more independent circuits are necessary for the application please get in touch with us for availability.
Remark: one. Please consult our sales engineer for the various pump displacement, motor electrical power or tank capability.
two. CSA or UL licensed motors can be found on request.
Special Notes
1. The AC motor is of S3 duty cycle, which can only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean the many hydraulic parts concerned prior to installation of the power unit.
3. Viscosity of the oil shoud be 15~46 cst,and the oil must be clean and totally free of impurities,N46 hydraulic oil is proposed.
4. The electrical power unit really should be mounted vertically.
5. Check the oil level while in the tank following the first running on the electrical power unit.
6. Oil transforming is required after the preliminary 100 operation hrs,afterwards as soon as each and every 3000 hrs.