Any damage over the teeth surfaces of a sprocket diminishes the life of your conveyor chain.
With standard sprockets, significantly worn sprocket teeth were repaired by teeth padding or the total sprocket was replaced. In both case, restore was expensive and with teeth padding, accuracy was impaired. We developed new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our shoppers for that dramatic financial savings in cost and time.
The teeth is usually replaced by two techniques: individual tooth substitute or sectional teeth replacement.
The bolts and nuts utilised for mounting the teeth on on the sprocket are spot-welded to stop loosening.
The respective structures are illustrated over the ideal.
The above photograph along with the top rated right illustration demonstrate a sprocket for person tooth substitute. Since the joint encounter concerning the replaced teeth plus the sprocket is formed within a distinctive arc, the bonding accuracy is higher as well as the sprocket strength is enhanced. In addition, since the load acting on the mounting bolts is decreased, there is significantly less probability of loosening. This sprocket development is patented.
You will find two varieties of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are employed for big sprockets obtaining heavy loads and welded sheet steel hubs for other applications.