Model Number: JZ-2500
Feature: Anti-Slip Grip, Folding, FSC, Heavy Duty, Anti-Slip Grip, Folding, FSC, Heav
Material: Metal, metal
Finishing: PTFE Coated
Digging Tool Type: Hole digger
Product Name: planting trees hole digger
Model: JZ-2500
Product name: planting trees hole digger
Packaging Details: wooden boxes
Port: HangZhou

Product ApplicationDescription:(1) Tripod CZPT machine is safe and stable, light in weight.(2) 400mm hole diameter, can drill maximum 2.5m depth.(3) High efficiency 4-stroke high-powered gasoline engine,(4) Equipped with wheels, the frame can be dismounted and carried separately, easy to operate and transport.Application: It is widely applied in electric power, telecommunications engineering, municipal engineering, tree planting project, construction project, solar power generation project, etc.

SPECIFICATIONS FOR 25 TON CRAWLER EXCAVATOR
Model JZ-2500
Height of frame 2500-2800mm
Drilling depth 2200-2500mm
Hole diameter 400mm
No. of axis 3pcs
Diameter of axis 25mm
Engine Single cylinder, 4-stroke, air cooled
Engine power 7.5Hp
Displacement 212cc
Engine rotation speed 3600r/min
Fuel tank capacity 3.6L
Oil capacity 1.0L
Petrol type 92#
Start mode Recoil start
Mode of driving Reducer axis chain drive
Gross weight 160kg
Packaging Wooden case

Main Features1.High efficiency: Tripod hole digger is very powerful, a hole of 10-40cm in diameter and 80-250cm in depth can be finished in 10 seconds -5 minutes.2. Easy to operate: Operator can easily finish the hole CZPT alone.3. High quality: Anti-10sile tripod positioning drill rod equipped with high strength drill bit, maximum drilling depth can reach 2.5m, and the drilling hole is straight, solid and less soil left inside.4. High practicability: Can be well used to drill holes on hills, mountains and other complicated terrain, applicable for drilling on loess layer, clay layer, soil layer with cobblestone and sand gravel, and other geology.5. The tripod hole digger is small in size, easy to operate at narrow space.
Certifications Our Service Packing & Delivery Our Company Contact Us Related Products Pile Driver with link91.6% Response Rate
Earth Auger with link86.9% Response Rate
Backpack Drill Rig with link89.8% Response Rate

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are three main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
air-compressor

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join two heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new one or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.

China High efficiency post hole digger 2.5m depth earth auger for planting trees     with Free Design CustomChina High efficiency post hole digger 2.5m depth earth auger for planting trees     with Free Design Custom
editor by czh